12-Port Passive Poe Injector-1U
||Hover over the image to zoom.|
Click the image for a popup.
This Power over Ethernet
1U rack mount device allows you to power devices remotely and
eliminates the need for transformers at the far end.
Passive and 802.3af POE
uses pins 4/5 for plus power, and 7/8 for ground.
Many popular devices like
IP Phones, Access Points and cameras use this method to centralize the
power source - you can go for 328 ft with a 24v or 48v supply to a
typical Access Point.
Connect the power supply
you need (24v for Ubiquiti, 18v for OpenMesh, 24v for Mikrotik, 48v for
802.3at or 802.3af and most cameras) and reduce the mess of cables. Use
CAT-5, CAT-6 or CAT-7 cables. Reboot all 12 devices from one central
location. We use these in our own installations and are making them
available for others. Use with OpenMesh,Wiligear, EnGenius,
Mikrotik-routerboard, WRAP, ALIX, UBNT and especially UniFi.
Different power supplies
are also available, 12v to 48v, 30 watt to 120 watts
* Power is all the time
on all port
* Same voltage to all
ports. Power is shared as needed
* Current limited to
650mA per port
* Compatible with most
wireless LAN standards including 802.11a,
802.11b, 802.11g and Bluetooth® as well as GSM, ISM, UNII, WiFi, PCS
and RFID applications.
* Wireless LAN Access
Points and Bridges
* Wireless LAN WiFi Amplifiers and Amplified Antennas
* VoIP (Voice over Internet Protocol) Telephones
* IP Surveillance Cameras
* Bluetooth® Access Points
* Web Cameras
* IEEE 802.3af Applications